STEAM BATHS &
STEAM SHOWERS:
Amerec Steam Bath
MrSteam Baths
Portable Steam Unit
Steam Capsules
Steam Showers
Steam Bath Pkgs

SAUNA ROOMS:
Sauna Packages
Amerec Sauna Rooms
MrSauna Rooms
Traditional
Features
Rooms
Heaters/Controls
Heater Specs
Size & Selection
Order / Pricing
Allegro
Natural Choice Saunas
Northern Lights Saunas
Portable Saunas

AROMATHERAPY:
AromaSteam
Aroma Oils

BATH, FANS, FILTERS:
Warma© Towels
Exhaust Fans
Water Filters
Bidet Seats
Sinks and Faucets

Natural Choice
Our Advantages
Tips & Techniques
Try Us Out!
Price List

About Us
Testimonials
Contact Us
Policies
Sitemap

Sauna Specifications

MrSauna Sauna Rooms - Are now Discontinued, try this Sauna

mr.steam saunas® Documentation:

• mr.steam saunas PreBuilt Room Assembly Instructions
• mr.steam saunas PreCutRoom Assembly Instructions
• mr.steam saunas Wall Heater Installation Instructions
• mr.steam saunas Floor Heater Installation Instructions
   

When selecting and installing MrSauna®, please pay attention to the following specifications:

• Pre-Built Sauna: Materials and Fabrication
• Pre-Cut Sauna: Materials and Fabrication
• Spa Series
• Millennium Series
• Models SA-1 to SA-8
• Models SA-10 to SA-16

You can also view the Engineering Specifications.

Click to download the:

• MrSauna® PreBuilt Room Assembly Instructions
• MrSauna® PreCutRoom Assembly Instructions
• MrSauna® Wall Heater Installation Instructions
• MrSauna® Floor Heater Installation Instructions
  

Pre-Built Sauna Materials and Fabrication

Return to topics.

PreCut Sauna: Materials and Fabrication

Wall Framing
Masonry or concrete walls to be stripped with 2x4 dry framing material 16-inch centers to provide nailing of wall paneling. Frame walls to be standard stud walls. If interior cedar is to be mounted vertically, horizontal furring strips are required.

Ceiling Frame
Ceiling height roughed to 85" with ceiling joists consisting of 2x4, 2x6, or 2x8 dry fir 16-inch center.

Door Framing
Rough opening for manufacturer’s standard sauna door should be 26" x82".

Sauna Interior Finish
1x6 V-joint T&G boards machined from clear softwood lumber kiln-dried to average 10% or less moisture content, sanded smooth. All boards full length glued with construction adhesive, blind nailed with 4d galvanized nails or equivalent power stapling.

Wood Specs
A & better clear western red cedar or clear all-heart redwood.

Sauna Insulation
Foiled-faced (inside) glass fiber blanket of thickness required to fill cavity between interior and exterior finish with a minimum "R" factor of 11 for both walls and ceiling or 1" U.L. rated flame retardant foam boards insulation.

Exterior Wall Finish
As selected by architect.

Exterior Ceiling Finish
Same as walls.

Sauna Floor Construction
Removable wood duckboards constructed of blind fastened vertical grain boards of same species as interior finish, laid loose over permanent finish flooring.

Sauna Bench Construction
1x4 or 2x2 clear vertical grain cedar with 1x4 face and frame members. Use galvanized nails and fasteners, concealed where possible.

Sauna Door
All cedar door with tempered, smoked vision panel, wooden door pull, self-closing hinge on mahogany jamb.

Sauna Accessories
Provide manufacturer’s standard accessories as follows:

• Sauna Thermometer.
• Wooden water bucket and ladle.
• One head rest and backrest.

Ventilation Openings
Inlet ventilation openings must be located at the bottom of the wall as close to floor level as possible.

• Rooms with a floor area equal to or less than 31 sq. ft. require ventilation openings of 9.3 sq. in. or more. High altitude installations may require reduced ventilation openings.
• Rooms with a floor greater than 31 sq. ft. require ventilation openings equal to the floor area multiplied by (0.3).
• Outlet ventilation openings must be located at the top of the wall as close to ceiling as possible and must be the size of the inlet openings.

Warning! Sauna room to be properly vented. Air flow heater should not be restricted.

Failure to do so may result in oxygen depletion or an improperly functioning heater. Fire sprinkler systems used inside any sauna room should be properly rated for sauna room temperatures. Failure to do so may result in defective fire prevention system.

Caution! Do not locate benches over heater. Minimum height of ceiling above heater 40".

Failure to do so may result in a fire and/or smoke hazard.

Do not place or install any unapproved products or materials inside the sauna room.

Do not use any stains or finish on sauna room interior. Doing so may result in dangerous fumes or fire.

Return to topics.

Spa Series

Heater Model	Maximum Cu. Ft.	Maximum Room Size	kW	Voltage//  Phase	Amps
SA - 1A1	84	3' x 4'	1.7	120/1	14
SA - 2C1	112	4' x 4'	2.2	220-240/1	9
SA - 4C1	175	5' x 5'	4.5	220-240/1	19
SA - 6C1	252	6' x 6'	6.7	220-240/1	28
SA - 6C3**	252	6' x 6'	6.7	220-240/3	16
SA - 8C1	392	7' x 8'	7.6	220-240/1	32
SA - 8C3**	392	7' x 8'	7.6	220-240/3	18

** Requires Contractor CNTR-2

Return to topics.

Millennium Series

Heater Model	Maximum Cu. Ft.	Maximum Room Size	kW	Voltage//  Phase	Amps
SA - 10C1***	616	8' x 11'	10	220-240/1	42
SA - 10C3**	616	8' x 11'	10	220-240/3	25
SA - 12C1****	770	10 'x 11'	12	220-240/1	50
SA - 12C3**	770	10' x 11'	12	220-240/3	29
SA - 14C1****	910	10' x 13'	14	220-240/1	59
SA - 14C3**	910	10" x 13'	14	220-240/3	34
SA - 16C1****	1120	10' x 16'	16	220-240/1	67
SA - 16C3**	1120	10' x 16'	16	220-240/3	39

Models SA-10 to SA-16 measure 20" W x 28" H x 16" D and weigh 90 lbs., plus rocks.

208/3 Phase available on Models SA-6 and larger.

** Requires Contractor CNTR-2
*** Requires Contractor CNTR-3
**** Requires Contractor CNTR-4

Return to topics.

Models SA-1 to SA-8

• Rocks: 30 lbs. (standard) or 60 lbs (optional)
• Sauna/One Control Location: On heater (standard) or on room exterior (optional)

Return to topics.

Models SA-10 to SA-16

• Rocks: 90 lbs. (standard)
• Sauna/Two Control Location: room exterior (standard)